[OAUGNet]-Looking for a possible solution to using a alternate part on a bom without creating a bunch of ECO's

["John Wheldon" <john_wheldon@qscaudio.com>]

I was looking to see if others out there run into the same problems my
company has with using alternate parts on a BOM without creating an ECO
to use the other part.  Basically the scenario is this.  We have a bom
to build our product.  Sometimes we need to create a variance to use a
part for a limited amount of time then go back to using the original on
the BOM after that time has expired.  We don't want to rev the BOM to
this part then Rev the BOM back to the original part but we want all
Work Orders to pick up the new part without us having to change it
manually.  That usually works correctly when you rev a BOM but we don't
want to do that.   So we are looking to have a solution that allows us
to use a temporary part on a bom without revising it but have all new
work orders created use this new temporary part.

 

Thanks for any suggestions anyone can chime in with.

John Wheldon
Applications Manager
QSC Audio Products, LLC.

1675 MacArthur Blvd, Costa Mesa, CA 92626

(714) 957-7143 

(714) 754-6132Fax

email: john_wheldon@qscaudio.com

web: www.qscaudio.com

 

This electronic message transmission contains information from QSC Audio
Products, LLC that may be confidential or privileged.  This information
is intended for the use of the individual or entity named above.  If you
are not the intended recipient, be aware that any disclosure, copying,
distribution or use of the contents of this transmission is strictly
prohibited.  If you have received this electronic transmission in error,
please notify us immediately via telephone.


#############################################################
This message is sent to you because you are subscribed to the mailing list <OAUGNet@oaug.com>.
To unsubscribe, E-mail to: <OAUGNet-off@oaug.com>
To switch to the FEED mode, send any message to <OAUGNet-feed@oaug.com>
To switch to the DIGEST mode, E-mail to <OAUGNet-digest@oaug.com>
To switch to the INDEX mode, E-mail to <OAUGNet-index@oaug.com>
Send administrative queries to  <OAUGNet-request@oaug.com>